Managing Virtual Memory / Pagefile in Windows 8

 

 

Your computer has two types of memory, Random Access Memory (RAM) and Virtual Memory. All programs use RAM, but when there isn't enough RAM for the program you're trying to run, Windows temporarily moves information that would normally be stored in RAM to a file on your hard disk called a Paging File. The amount of information temporarily stored in a paging file is also referred to as virtual memory. Using virtual memory, in other words, moving information to and from the paging file, frees up enough RAM for programs to run correctly.

The more RAM your computer has, the faster your programs will generally run. If a lack of RAM is slowing your computer, you might be tempted to increase virtual memory to compensate. However, your computer can read data from RAM much more quickly than from a hard disk, so adding RAM is a better solution.

If you receive error messages that warn of low virtual memory, you need to either add more RAM or increase the size of your paging file so that you can run the program on your computer. Windows usually manages this automatically, but you can manually change the size of virtual memory if the default size isn't large enough for your needs.

There is a formula for calculating the correct pagefile size. Minimum pagefile size is one and a half (1.5) x the amount of memoryMaximum pagefile size is three (3) x the minimum pagefile size. Let's say you have 2 Gb (2,048 Mb) of memory. The minimum pagefile size would be 1.5 x 2,048 = 3,072 Mb and the maximum pagefile size would be 3 x 3,072 = 9,216 Mb.

How to change the pagefile size in Windows 8

  1. Open the System Properties, press the Windows logo key Windows logo key + Pause or use the Power User menu (Windows logo key Windows logo key + X) and select System.
    Managing Windows 8 virtual memory 1
  2. If you are going to use the formula above to configure your pagefile, make note of the amount of installed memory under the System category.
    Managing Windows 8 virtual memory 2
  3. In the left pane, click Advanced system settings. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
  4. On the Advanced tab under Performance, click Settings.
    Managing Windows 8 virtual memory 3
  5. Click the Advanced tab and then under Virtual memory, click Change.
    Managing Windows 8 virtual memory 4
  6. Clear the Automatically manage paging file size for all drives check box.
    Managing Windows 8 virtual memory 5
  7. Under Drive [Volume Label], click the drive that contains the paging file you want to change.
  8. Click Custom size, type a new size in megabytes in the Initial size (MB) and Maximum size (MB) box, click Set, and then click OK.

Note: Increases in size usually don't require a restart for the changes to take effect, but if you decrease the size, you'll need to restart your computer. It is recommended that you don't disable or delete the paging file.

Read 80 times
Dylan Austin

About:

Whenever I have a problem, I sing. Then I realize my voice is worse than my problem.

Top
We use cookies to improve our website. By continuing to use this website, you are giving consent to cookies being used. More details…